SimVascular_report_PostProcess/functions.py

 #!/usr/bin/env python
"""
Created on Thu Jul 16 15:08:27 2020

@author: Aloma Blanch
"""

import matplotlib
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
import matplotlib.transforms as mtransforms

from math import floor
from statistics import mean 
from scipy.signal import find_peaks

def cycle(folder,dt,save_path):
    pressure = np.loadtxt(folder + '/PHistRCR.dat',skiprows=2)
    N_ts = pressure.shape[0]
    T = round(dt*N_ts,3)
    time = np.linspace(0,T,N_ts)
    # Find peaks, keep only the maximums
    peaks, _ = find_peaks(pressure[:,-1])
    idx = np.where(pressure[peaks,-1] >= np.mean(pressure))
    peaks_loc = peaks[idx]
    P_peaks = pressure[peaks,-1][pressure[peaks,-1] >= np.mean(pressure)]
    # Rmove the multiple picks found in the same location
    idx_del  = []
    t_pk_loc = time[peaks_loc].tolist()
    peak_tdiff = [t_pk_loc[n]-t_pk_loc[n-1] for n in range(1,len(t_pk_loc))]
    for i in range(0,len(peak_tdiff)):
        if peak_tdiff[i]<= dt*10:
            idx_del.append(i)
            t_pk_loc[i] = []
            peak_tdiff[i] = []    
    t_pk_loc[:] = [x for x in t_pk_loc if x]
    peak_tdiff[:] = [x for x in peak_tdiff if x]
    P_peaks = np.delete(P_peaks,idx_del)

    fig, ax = plt.subplots()
    ax.plot(time,pressure[:,-1]/1333.22,'b')
    ax.plot(t_pk_loc, P_peaks/1333.22, "or",label='peak location')
    ax.set(xlabel='time [s]', ylabel='Pressure [mmHg]',
       title='Pressure at last outlet')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    ax.legend(loc=0)
    # plt.show()
    plt.savefig(save_path + '/Pressure_max_n_cycles.pdf')
    return (floor(mean(peak_tdiff[1:])*1000)/1000,len(t_pk_loc))

def error_plot(folder,t_step,r_criteria,save_path):
    # Load iterations and residual error
    histor = folder + '/histor.dat'
    input = open(histor, 'r')
    output = open(folder + "/histor_better.dat", 'w')
    output.writelines(line.strip() +'\n' for line in input)
    input.close()
    output.close()
    error_info = pd.read_csv(folder + "/histor_better.dat", sep=' ', header=None, usecols=(0,1,2))

    # Select only last iteration of residual error
    error=[] 
    for n in range(1,error_info.shape[0]):
        if (error_info[0][n]>error_info[0][n-1]):
            error.append(error_info[2][n-1])

    time = np.linspace(start = t_step, stop = len(error)*t_step, num = len(error))

    # Liniar Scale
    fig, ax = plt.subplots()
    ax.plot(time,error)
    ax.plot(time,r_criteria*np.ones(len(error)),'r')
    ax.set(xlabel='Time steps', ylabel='Residual error',
        title='Last nonlinear residual error for each time step')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    # plt.show()
    plt.savefig(save_path + '/Last_nonlin_res_error.pdf')
    # Semilog scale
    fig, ax = plt.subplots()
    ax.semilogy(time,error)
    ax.semilogy(time,r_criteria*np.ones(len(error)),'r')
    ax.set(xlabel='Time steps', ylabel='Residual error',
        title='Log - Last nonlinear residual error for each time step')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    # plt.show()
    plt.savefig(save_path + '/Log_Last_nonlin_res_error.pdf')
    fig.savefig(save_path + '/Log_Last_nonlin_res_error.jpg',dpi=150)


def periodicity(project,folder,dt,T_cyc,n_cyc,save_path):
    pressure = np.loadtxt(folder+'/PHistRCR.dat',skiprows=2,)
    time = np.linspace(0,T_cyc*n_cyc,round(T_cyc/dt*n_cyc))
    peak_P = []
    peak_P_pos = []
    Nc = round(T_cyc/dt)
    for i in range(0,n_cyc):
        peak_P.append(np.amax(pressure[i*Nc:Nc*(i+1),-1])/1333.22)
        peak_P_pos.append(np.where(pressure[i*Nc:Nc*(i+1),-1] == np.amax(pressure[i*Nc:Nc*(i+1),-1]))[0][0]+Nc*i)
    
    peak_Pdiff = [peak_P[n]-peak_P[n-1] for n in range(1,len(peak_P))]
    peak_Pdiff = list(map(abs, peak_Pdiff)) 
    
    fig, ax = plt.subplots()
    ax.plot(time,pressure[:,-1]/1333.22,'b')
    ax.plot(time[peak_P_pos], peak_P,'ro',label='Cycle pike')
    ax.set(xlabel='time [s]', ylabel='Pressure [mmHg]',
        title='Pressure at last outlet')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    ax.legend(loc=0)
    # plt.show()
    plt.savefig(save_path + '/periodicity.pdf')
    fig.savefig(save_path + '/periodicity.jpg',dpi=150)
    
    if (peak_Pdiff[-1]<=1): 
        print('The numerical simulation \'{0}\' has achieve periodicity!\nSystolic Blood Pressure (SBP):\nsecond-last cycle = {1:.2f} mmHg,\nlast cycle = {2:.2f} mmHg,\n\u0394mmHg = {3:.2f} mmHg'.format(project,peak_P[-2],peak_P[-1],peak_Pdiff[-1]))  
        txt = ['The numerical simulation \'{0}\' has achieved periodicity.'.format(project), 'Systolic Blood Pressure (SBP):', 'Second-last cycle = {0:.2f} mmHg'.format(peak_P[-2]), 'Last cycle = {0:.2f} mmHg'.format(peak_P[-1]), 'Delta_mmHg = {0:.2f} mmHg'.format(peak_Pdiff[-1])]
    return txt
    
def pressure(folder,N_ts,T_cyc,dt,n_cyc,save_path):
    pressure = np.loadtxt(folder+'/PHistRCR.dat',skiprows=2,)
    Nc = round(T_cyc/dt)
    time = np.linspace(0,T_cyc,Nc)
    fig, ax = plt.subplots()
    SBP = np.empty(pressure.shape[1])
    DBP = np.empty(pressure.shape[1])
    MBP = np.empty(pressure.shape[1])
    for i in range(0,pressure.shape[1]):
        ax.plot(time,pressure[N_ts-Nc:N_ts,i]/1333.22,label='ROI-'+str(i+2)) 
        SBP[i] = (np.amax(pressure[N_ts-Nc:N_ts,i]/1333.22))
        DBP[i] = (np.amin(pressure[N_ts-Nc:N_ts,i]/1333.22))
        MBP[i] = (mean(pressure[N_ts-Nc:N_ts,i]/1333.22)) 
    PP = SBP-DBP    
    ax.set(xlabel='time [s]', ylabel='Pressure [mmHg]',
        title='Pressure at each outlet')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    ax.legend(loc=0)
    # plt.show()
    plt.savefig(save_path + '/pressure.pdf')
    fig.savefig(save_path + '/pressure.jpg',dpi=150)
    return (DBP,MBP,SBP,PP)


def flow(folder,N_ts,T_cyc,dt,n_cyc,save_path):
    flow = np.loadtxt(folder+'/QHistRCR.dat',skiprows=2,)
    Nc = round(T_cyc/dt)
    time = np.linspace(0,T_cyc,Nc)
    fig, ax = plt.subplots()
    Q = np.empty(flow.shape[1])
    for i in range(0,flow.shape[1]):
        ax.plot(time,flow[N_ts-Nc:N_ts,i],label='ROI-'+str(i+2))
        Q[i] = (mean(flow[N_ts-Nc:N_ts,i]))
   
    ax.set(xlabel='time [s]', ylabel='Flow [mL/s]',
        title='Flow at each outlet')
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    ax.legend(loc=0)
    # plt.show()
    plt.savefig(save_path + '/flow.pdf')
    fig.savefig(save_path + '/flow.jpg',dpi=150)
    return Q
    
def inlet_flow_waveform(project_folder,t_btw_rst,N_ts,dt,T_cyc,n_cyc,save_path):
    x = np.loadtxt(project_folder+'/ROI-1.flow')
    t = x[:,0]
    Q = -x[:,1]
    Nt_pts = np.linspace(t_btw_rst,N_ts,int(N_ts/t_btw_rst))
    t_pts = Nt_pts*dt
    # Put all the time values on a single cardiac cylce            
    for n in range(len(t_pts)):
        tmp=divmod(t_pts[n],T_cyc)
        t_pts[n]=tmp[1]
        if round(tmp[1],3) ==  0:
            t_pts[n]=T_cyc
    # Interpolate the flow rate to obtain the location of the point
    Q_pts = np.interp(t_pts, t, Q)

    fig, ax = plt.subplots()
    ax.plot(t, Q, 'r')
    ax.plot(t_pts, Q_pts, 'ob',label='Time steps saved')
    trans_offset = mtransforms.offset_copy(ax.transData, fig=fig,
                                       x=-0, y=0.15, units='inches')
    ax.set(xlabel='Time [s]', ylabel='Flow Rate - Q [mL/s]',
       title='Inlet Flow Rate Waveform')
    ax.set_ylim([-10, 90])
    ax.spines['right'].set_visible(False)
    ax.spines['top'].set_visible(False)
    # Adding label to the points
    
    time = []
    for i in range(0,np.unique(np.round(t_pts,3)).shape[0]):
        time.append('$t_'+str(i+1)+'$')
    for x, y, t in zip(t_pts[(-n_cyc-1):], Q_pts[(-n_cyc-1):], time):
        plt.text(x, y, t, transform=trans_offset, fontsize=12)    
    ax.legend(loc=0)
    # plt.show()
    plt.savefig(save_path + '/inlet_waveform.pdf')
    fig.savefig(save_path + '/inlet_waveform.jpg',dpi=150)
    print('{0} time steps saved, available to visualize in ParaView.'.format(np.unique(np.round(t_pts,3)).shape[0]))
    txt = '{0} time steps saved, available to visualize in ParaView.'.format(np.unique(np.round(t_pts,3)).shape[0])
    return txt
      

def rcr(project_folder):
    rcr_lines = []
    with open (project_folder + '/rcrt.dat', "rt") as myfile:
        for myline in myfile:
            rcr_lines.append(myline)
    n_out = int((len(rcr_lines)-1)/6)
    Rc_C_Rd = np.empty([n_out,3])
    for i in range(0,n_out):
        Rc_C_Rd[i][0] = float(rcr_lines[2+i*6][:-1])
        Rc_C_Rd[i][1] = float(rcr_lines[3+i*6][:-1])
        Rc_C_Rd[i][2] = float(rcr_lines[4+i*6][:-1])
    return Rc_C_Rd
        
def barPlot(project_folder,DBP,MBP,SBP,PP,Q_avg,save_path):
    aimed_all = [1]     #No li agrada fer append en una llista buida, no recordo perquè i segur que es pot fer millor
    f = open(project_folder+'/aimed.txt', 'r') #obrir el fitxer
    for line in f:
        aimed_all = line.split() #fas una llista amb cada valor de la línia carregan-te els espais buits
    del aimed_all[0] #esborrar el primer valor que has posat perquè no estigues buida la llista  
        
    def plot_bar(CFD,aimed,name,save_path,unit):
        labels = []
        for i in range(0,len(CFD)):
            labels.append('ROI-'+str(i+2))
        x = np.arange(len(labels))  # the label locations
        width = 0.38  # the width of the bars
        fig, ax = plt.subplots()
        rects1 = ax.bar(x - width/2, CFD, width, label='CFD',color='k')
        rects2 = ax.bar(x + width/2, aimed, width, label='Aimed',color='white', edgecolor='black', hatch='/')
        ax.set_ylabel(name + unit)
        ax.set_title(name)
        ax.set_xticks(x)
        ax.set_xticklabels(labels)
        ax.legend()
        high = max(max(aimed,CFD))
        ax.set_ylim(top = 1.7*high)
        def autolabel(rects):
            """Attach a text label above each bar in *rects*, displaying its height."""
            for rect in rects:
                height = rect.get_height()
                ax.annotate('{}'.format(height),
                            xy=(rect.get_x() + rect.get_width() / 2, height),
                            xytext=(0,3),  # 3 points vertical offset
                            textcoords="offset points",
                            ha='center', va='bottom',
                            fontsize = 7.5)
    
        autolabel(rects1)
        autolabel(rects2)
        # Create labels
        err = []
        zip_object = zip(CFD, aimed)
        for x1_i, x2_i in zip_object:
            err.append(round((x1_i-x2_i)/x2_i*100,2))
 
        # Text on the top of each barplot
        for i in range(len(x)):
            plt.text(x = x[i]- width/2, y = max(CFD[i],aimed[i])+0.15*max(max(CFD,aimed)), s = str(err[i])+'%', fontsize = 8, color='r')

        fig.tight_layout()
        # plt.show()
        plt.savefig(save_path + '/'+name+'_bar.pdf')
        fig.savefig(save_path + '/'+name+'_bar.jpg',dpi=150)        
    
    # DBP
    CFD = [round(float(i),1) for i in DBP]
    aimed = [round(float(i),1) for i in aimed_all[0]]
    plot_bar(CFD,aimed,'DBP',save_path,' [mmHg]')
    
    # MBP
    CFD = [round(float(i),1) for i in MBP]
    aimed = [round(float(i),1) for i in aimed_all[1]]
    plot_bar(CFD,aimed,'MBP',save_path,' [mmHg]')
    
    # SBP
    CFD = [round(float(i),1) for i in SBP]
    aimed = [round(float(i),1) for i in aimed_all[2]]
    plot_bar(CFD,aimed,'SBP',save_path,' [mmHg]')
    
    # PP
    CFD = [round(float(i),1) for i in PP]
    aimed = [round(float(i),1) for i in aimed_all[3]]
    plot_bar(CFD,aimed,'PP',save_path,' [mmHg]')
    
    # DBP
    CFD = [round(float(i),1) for i in Q_avg]
    aimed = [round(float(i),1) for i in aimed_all[4]]
    plot_bar(CFD,aimed,'Q_avg',save_path,' [mL/s]')